| ABOUT | ||
| These pages are about Open Source Hardware and Software Home Automation Project based on Controller Area Network HAPCAN. These pages give information how to create your own home automation system. Here you can find device schematics, firmware and PC software to program and control the system. The system is also available as fully assembled devices at online shop. |
 |
 |
 |
 |
| HAPCAN MODULES CONSUME LOW ENERGY | |
  |
 |
 |
 |
 |
 |
|
TOUCH PANEL 8mA@24V (0.2W) (with 6 LEDs turned on - 18mA) |
DIN RAIL BUTTON 12mA@24V (0.3W) |
BISTABLE RELAY 8mA@24 (0.2W) (even with 6 relays turned on) |
BACK BOX BUTTON
14mA@24V
(0.35W) (with 14 LEDs turned on - 40mA) |
RGB LED CONTROLLER 8mA@24V (0.2W) (max. 26mA) |
BLINDS CONTROLLER 8mA@24V (0.2W) (max. 56mA) |
| NEWS | |||
| 9 October 2022 |
 |
BISTABLE RELAY 16A - NEW FIRMWARE UNIV 3.2.4.3 - replies to channel name request |
Bistable relay 16A |
| 23rd July 2021 |
 |
RS232C INTERFACE - NEW
HARDWARE UNIV 3.101.0.x - RS232 connector changed |
RS232C interface |
| 23rd July 2021 |
 |
HAPCAN PROGRAMMER 3.54 Prepared to support 3 wire RS232C connection of new RS232C interface hardware |
HAPCAN Programmer |
| 10th February 2019 |
 |
DIMMER - NEW
FIRMWARE UNIV 3.6.0.2 - added possibility of using less or equal and greater or equal operators when creating messages in boxes - eliminated light flash when saving to eeprom |
Dimmer |
| 28th April 2018 |
 |
OPEN COLLECTOR OUTPUTS - NEW DEVICE Isolated 10 channel open collector output module in 3 mod enclosure |
Open Collector Outputs |
| 4 March 2018 |
|
BISTABLE RELAY 16A - NEW FIRMWARE UNIV 3.2.4.2 - added possibility of using less or equal and greater or equal operators when creating messages in boxes |
Bistable relay 16A |
| 21 January 2018 |
 |
BACK BOX 14 BUTTONS The wiring diagram for Berker TS Sensor touch panel has been added to the application note |
Back box 14 buttons |